- Tungsten carbide composite sanda an yi shi da siminti carbide tukwici da Ni/Ag(Cu) gami. Abubuwan da ake amfani da su na carbide koyaushe su kasance tungsten carbide crushed grits, abubuwan da ake sakawa na carbide, kamar abubuwan da ake saka tauraro na carbide.
- Taurin shine 89-91 HRA, ƙarfe mai ɗaure shine Ni da gami da jan ƙarfe, ƙarfin zai iya zuwa 690MPa, taurin HB≥160.
bayanin
Muna da masana'anta ta musamman a cikin tungsten carbide, muna kuma samar da wasu samfuran da yawa waɗanda ba za mu iya samarwa ba. sadaukar da albarkatun mafi kyawun samfuran ga waɗanda ke son samun samfuran inganci da farashi mafi kyau.
Bayani:
Tungsten carbide composite sanda an yi shi da siminti carbide tukwici da Ni/Ag(Cu) gami. The carbide tips ko da yaushe zama tungsten carbide crushed grits, carbide sa abun da ake sakawa, kamar carbide star siffar abun da ake sakawa, carbide dala siffar abun da ake sakawa, shark siffar abun da ake sakawa da sauransu. Wani lokaci, tukwici na carbide na iya zama tungsten carbide foda. Zaɓin tattalin arziki shine tungsten carbide crushed grits. Idan kana so ka zama mai ɗorewa fiye da grits na carbide, abubuwan saka carbide ya fi kyau. Koyaya simintin carbide / murƙushe carbide tare da kaifi mai kaifi yana da ingantacciyar juriya da iya yanke ma.
Taurin shine 89-91 HRA, ƙarfe mai ɗaure shine Ni da gami da jan ƙarfe, ƙarfin zai iya zuwa 690MPa, taurin HB≥160.
A taƙaice, yawancin sandar Haɗe-haɗe da aka yi ta amfani da ƙwayar tungsten Carbide da aka murƙushe da aka haɗe da matrix nickel na tagulla, (Cu 50 Zn 40 Ni 10) tare da ƙaramin narkewa (870°C).
Girman hatsi na grits na carbide:
1/8-1/16 in. (3.2-1.6 mm)
3/16-1/8 in. (4.8-3.2 mm)
1/4-3/16 in. (6.3-4.8 mm)
3/8-5/16 in. (9.5-7.9 mm)
5/16-1/4 in. (7.9 -6.3 mm)
3/8-1/4 in. (9.5-6.3 mm)
1/2-5/16 in. (12.7-7.9 mm)
Maki na sanduna masu haɗaka
Akwai manyan maki biyu ya dogara da bambancin Rabo na grits tungsten carbide
Daraja
Abubuwan sinadaran(%)
Ayyukan jiki
Aikace-aikace
WC
Ku+Zn+Sn
Co
BT-Cu-30
64-67
30±2
3.8-4.2
Tauri:>160 HB TRS:>690MPa
160 HB TRS:>690MPa
690MPa
Down rami kayan aikin
Plungers
Shafts
Kayan aikin noma/ma'adinai
Vlaves
Turbine BladesBT-Cu-40
53-56
40±2
4.6-4.8
BT-Cu-45
48-52
45±2
4.2-4.5
BT-Cu-50
44-48
50±2
3.8-4.2
Kayan aikin haɗin gwiwa
Extruder ganga da sukuroriAbuCarbide gr
Appta
girman
lokacin
Akwai nisa (mm)
Akwai tsawon (mm)
1
1.6-3.2
1/8-1/16
(mm)
(inch)
280- 450
2
3.2-4.8
3/16-1/8
3
4.8-6.4
1/4-3/16
4
6.4-8.0
5/16-1/4
5
8.0-9.5
3/8-5/16
6
9.5-11.0
7/16-3/8
7
11.0-12.7
1/2-7/16
Bare ko tare da mai-shafi
(20-22 ) (10-20) (10-12)Girma, nauyin naúrar, grits masu girma dabam na iya zama OEM.
An amince da walƙar sanda mai haɗaɗɗiya a duk lokacin haƙar mai, hakar ma'adinai da masana'antar gine-gine a duk duniya saboda ƙaƙƙarfan ƙaƙƙarfan kaddarorin sa na jure lalacewa. Amfani yana yaduwa zuwa masana'antu da yawa kuma yana samun amfani mai yawa. Haɗaɗɗen sandar walda tana da lalacewa da yanke kaddarorin haɗe ta hanyar weldability mai tsayi da ƙarancin hayaƙi, ƙyale kayan suyi amfani da su.
a stabilizers, reamers, haƙora bututu, ginin hakowa, na'ura mai aiki da karfin ruwa-cutter, bututu yankan ruwan wukake, core bit, scraper, murza rawar soja, niƙa da nika takalma da dai sauransu.
FAQ na sandan hadakar carbide na Tungsten
Tambaya: Shin ku kamfani ne ko masana'anta?
A: Mu masana'anta ne.
Tambaya: Yaya tsawon lokacin isar ku?
A: Gabaɗaya a cikin kwanaki 7 idan kayan suna hannun jari. ko kuma kwanaki 15-20 ne idan kayan ba a hannun jari suke ba
bisa ga adadi.
Q: Kuna samar da samfurori? kyauta ne ko kari?
A: Ee, za mu iya ba da samfurin don cajin kyauta amma kada ku biya farashin kaya.
Tambaya: Menene sharuɗɗan biyan ku?
A: Biya
Kudin hannun jari Zhuzhou Better Tungsten Carbide Co., Ltd
ADDRESS:B/V 12-305, Da Han Hui Pu Industrial Park, Birnin Zhuzhou, China.
Waya:+86 18173392980
Tel:0086-731-28705418
Fax:0086-731-28510897
Imel:[email protected]
WhatsApp/Wechat:+86 181 7339 2980