- Ngwa: maka ime ịcha ngwá ọrụ, dị ka igwe ihe ọgwụgwụ, eze burs, reamer wdg
- Dayameta: 3mm ruo 30mm
- Ogologo: 330mm / 310mm ma ọ bụ ahaziri
- Ihe onwunwe: WC+Co
nkọwa
Anyị nwere ụlọ ọrụ mmepụta ihe pụrụ iche na tungsten carbide, anyị na-enyekwa ọtụtụ ngwaahịa ndị ọzọ anyị enweghị ike imepụta. gbalịsiri ike nweta ngwaahịa kacha mma maka ndị chọrọ inweta ezigbo mma na ngwaahịa ọnụahịa kacha mma.
Kedu ihe bụ tungsten carbide rod?
Tungsten carbide mkpanaka, nke a na-akpọkwa carbide round bar,mkpanaka carbide ciment,bụ ihe siri ike, ike dị elu na ihe siri ike nke nwere isi ihe eji eme ihe nke WC, yana ọla ndị ọzọ na mado na-eji ụzọ ígwè ntụ ntụ site na nkwụsịtụ dị ala.
Kedu uru nke mkpanaka carbide simented?
Tungsten carbide mkpanakabụ ihe a na-ahọrọ maka ịmepụta ngwá ọrụ ịkpụ ígwè, nke a na-ejikarị eme ihe na ụlọ ọrụ ndị nwere nnukwu ihe a chọrọ maka nkwụsị nkwụsị, nkwụsị nke corrosion na oke okpomọkụ. Ọ nwere nnukwu arụmọrụ pụtara ìhè.
Kedu otu esi eji tungsten carbide rods?
Enwere ike iji mkpanaka Carbide ọ bụghị naanị maka ịkpụ na akụrụngwa akụrụngwa (dị ka micron, ọkpọkọ ọkpọkọ, nkọwapụta ngwa ngwuputa kwụ ọtọ), kamakwa maka agịga ntinye, ụdị mpịakọta dị iche iche na-eyi akụkụ na ihe nhazi. Na mgbakwunye, enwere ike iji ya n'ọtụtụ mpaghara, dịka igwe, kemịkalụ, mmanụ ala, ọla, ngwa elektrọn na ụlọ ọrụ nchekwa.
1.Carbide mkpara maka ime ịkpụ ngwaọrụ
2.Carbide mkpanaka maka ịme ọkpọ
3.Carbide mkpanaka maka ime mandrels
4.Carbide mkpara na-eme ka ngwá ọrụ njide
5.Carbide mkpara maka ime plunger
6.Carbide mkpara na-eme ka ịkpọpu ngwaọrụ
1. Ụdị nkọwapụta:ØD×L
2. Ngwa: n'ihi na-eme ka ịcha ngwá ọrụ, dị ka ihe atụ ọgwụgwụ ọgwụgwụ, eze burs, reamer wdg
3. Dayameta: 3mm ruo 30mm
4. Ogologo: ọkọlọtọ 330mm / 310mm ma ọ bụ ahaziri
5. Elu: oghere ma ọ bụ ala
6. Ihe: WC+CO
Aha ngwaahịa | Mkpara carbide siri ike oghere na ala |
Ihe onwunwe | WC+CO |
Ọkwa | K05-K40 |
Nha ọka | mma, ọkara |
Isi ike | 87.6-94HRA |
T.R.S | 3000-4200 |
Elu | oghere ma ọ bụ ala |
Ngwa | A na-eji ya maka nrụpụta ngwaọrụ dị ka igwe ihe ngwucha, ihe ngwupụta ihe, reamers na ọnya eze |
Njirimara ọkwa
Ọkwa | Koodu ISO | Nha ọka | Cobalt | Njupụta (g/cm3) | Isi ike (HRA) | T.R.S(Mpa) |
UBT05 | K05-K10 | 1.0 | 6.0 | 14.95 | 92 | 3000 |
UBT10 | K05-K10 | 0.4 | 6.0 | 14.8 | 94 | 3800 |
UBT20F | K20-K40 | 0.8 | 10.2 | 14.5 | 91.5 | 3900 |
UBT20 | K20-K40 | 0.6 | 10.2 | 14.3 | 92.3 | 3800 |
UBT25 | K20-K40 | 0.4 | 12 | 14.1 | 92.5 | 4200 |
UBT30 | K30-K40 | 1.5 | 15 | 14 | 87.6 | 4000 |
Ngwa ọkwa
Ọkwa | Ngwa akwadoro |
UBT05 | A na-atụ aro ịkụ ọkpọ, endmill na burr. Kwesịrị ekwesị maka ịkpụ ọla na graphite na-abụghị igwe (a chọrọ mkpuchi) |
UBT10 | Nha ọka Ultrafine, nwere ezigbo ike eyi. A na-atụ aro igwe njedebe na-eguzogide iyi dị elu na ihe osise. Kwesịrị ekwesị maka ịcha PCB na plastik |
UBT20F | A na-atụ aro ịkụ ọkpọ na igwe ihe. Kwesịrị ekwesị maka ịkpụ nchara nchara (HRC |
UBT20 | A na-atụ aro ịkụ ọkpọ na igwe ihe. Kwesịrị ekwesị maka ịkpụ igwe anaghị agba nchara, alloy na-eguzogide okpomọkụ na nkedo ígwè |
UBT25 | Nha ọka ultrafine, ọdịnaya cobalt dị elu nwere ezigbo isi ike na isi ike, endmill na reamer ka akwadoro, ọkachasị dabara maka ịkpụ nchara(HRC:45-55), alloy aluminum na alloy titanium. |
UBT30 | Kwesịrị ekwesị maka ịkụ ọkpọ, ngwá ọrụ na mmanya na-agwụ ike na-agwụ ike, wdg |
Ekwuru: anyị nwere ike ịmepụta mkpanaka tungsten carbide maka arịrịọ ndị ahịa
Ụgwọ nke ụlọ ọrụ Zhuzhou Better Tungsten Carbide Co., Ltd
Adreesị:B/V 12-305, Da Han Hui Pu Industrial Park, Obodo Zhuzhou, China.
Ekwentị:+86 18173392980
Tel:0086-731-28705418
Faksị:0086-731-28510897
Email:[email protected]
WhatsApp/Wechat:+86 181 7339 2980