- Hoʻohana ʻia ke poʻo anu ʻo Tungsten carbide no ke kuʻi ʻana i nā mea paʻa. E like me bolts, nuts, nails, studs, etc.
wehewehe
Loaʻa iā mākou kahi hale hana kūikawā i ka tungsten carbide, hāʻawi pū mākou i nā huahana ʻē aʻe ʻaʻole hiki iā mākou ke hana. hoʻokō i nā huahana maikaʻi loa no ka poʻe makemake e loaʻa nā huahana maikaʻi a maikaʻi loa.
He aha nā hiʻohiʻona o ka mold carbide?
Tungsten carbide make i ka hana ma waena o thnā mea hana a me nā mea hana ma waena o nā seramika a me ke kila kiʻekiʻe-wikiwiki, loaʻa ka hana holoʻokoʻa o ke kiʻekiʻe
ʻo ka paʻakikī, ka ikaika kiʻekiʻe, ke kiʻekiʻe kiʻekiʻe, ka pale ʻana i ka corrosion, ke kūpaʻa ʻana o ka wela wela a me ka coefficient haʻahaʻa o ka hoʻonui. ʻO ka manaʻolana o kona ola he ʻumi manawa
a i ʻole kekahi mau manawa ma luna o ke kila.
He aha nā mea hoʻohana o ka tungsten carbide heading make?
He kūpono no ke poʻo anu a me ke kuʻi anu o nā ʻāpana maʻamau i hana ʻia me ke keleawe, aluminika, ke kila, ke kila kila, nā ʻūlū, nā rivets, a me nā mea ʻē aʻe, me ke poʻo pālahalaha make ke poʻo anu
make ke poʻo countersunk ke poʻo anu, make ke kuʻi mua, make ke koʻokoʻo liʻiliʻi a me nā ʻano like ʻole.
He aha kā mākou mau mea maikaʻi?
1.Using 99.95% high-purity tungsten carbide powder and cobalt,
2. ʻoi aku ka paʻakikī o ke poʻo anu ma luna o HRA88, a ʻoi aku ka ikaika o ka piko ma luna o 2400.
3. Loaʻa iā ia ka ʻulaʻula maikaʻi loa, ke kūpaʻa ʻaʻahu kiʻekiʻe, ka modulus elastic kiʻekiʻe, ka pale ʻana i ka hopena no ka ikaika kulou kiʻekiʻe.
4.E koho i kahi papa kūpono e like me ka hoʻohana maoli ʻana o ka mea kūʻai aku a me nā mea e hana ʻia.
5. Hoʻopihaʻia nā kiko'ī, ua pololei ka nui o kaʻeleʻele, ua ho'ēmiʻia ka nui o ka hana, a ua hoʻonuiʻia ka maikaʻi a me ke kumukūʻai.
6.Free laʻana / Kākoʻo hana maʻamau
| ʻO ka pae tungsten carbide no ke kuʻi ʻana a make ke poʻo | ||||
| Papa | hana | Paipai ʻia ka noi | ||
| ʻO ka mānoanoa | ʻoʻoleʻa | Piʻo ikaika | ||
| g/cm3 | HRA | N/mm2 | ||
| YG11 | 14.4 | 88.5 | 2600 | Hoʻokumu a hoʻopaʻa ʻia paha i make no nā pauka metala a me nā pauka nonmental. |
| YG15 | 14 | 87.5 | 2800 | No ka hana ʻana i nā kiʻi make o nā paipu kila a me nā koʻokoʻo ma lalo o ke kiʻekiʻe |
| compressibility ratio; punching, stamping, forging tools ma lalo o ke kaumaha nui. | ||||
| YG20 | 13.5 | 85.5 | 3200 | No ka hana ʻana i nā dies stamping no nā ʻāpana wati, nā papa puna o ke mele |
| nā mea kani, nā ipu pākaukau, nā pōpō kila liʻiliʻi, nā ʻūlū, nā pāpale wili. | ||||
| YG16C | 13.9 | 85.5 | 2900 | Impact resistance, wela & forging make etc. |
| YG18C | 13.7 | 84.5 | 3100 | Impact resistance forging make, hot-press forging dies and rollers. |
| YG20C | 13.5 | 83.5 | 3300 | Make no ka noi pale ʻana a i ʻole ka hopena. |
| YG22C | 13.3 | 83 | 3500 | ʻO ka make ʻana o ka nut a me ke kūpaʻa kiʻekiʻe. |
| YG25C | 13.1 | 82.5 | 3600 | ʻO ke poʻo poʻomanaʻo bolt kuhiliʻole make a me nā wili. |
Hiki iā mākou ke hāʻawi i nā pihi ʻokoʻa like ʻole e like me kou makemake.
| OD(mm) | Id(mm) | H(mm) |
| 10 | 1~5.0 | <30 |
| 12 | 1~6.0 | <40 |
| 13 | 1~6.0 | <40 |
| 15 | 1~8.0 | <60 |
| 16 | 1~8.0 | <60 |
| 18 | 1~10.0 | <60 |
| 20 | 1~10.0 | <60 |
| 22 | 1~10.0 | <60 |
| 25 | 1~12.0 | <60 |
| 26 | 1~12.0 | <60 |
| 28 | 1~16.0 | <60 |
| 30 | 1~18.0 | <80 |
| 35 | 1~25.0 | <80 |
| 40 | 1~25.0 | <80 |
| 45 | 1~25.0 | <80 |
| 50 | 1~30.0 | <80 |
| 55 | 1~30.0 | <80 |
| 60 | 1~30.0 | <80 |
ʻO Zhuzhou Better Tungsten Carbide Co., Ltd
HELU:B/V 12-305, Da Han Hui Pu Industrial Park, Zhuzhou City, Kina.
Kelepona:+86 18173392980
Tel:0086-731-28705418
Fax:0086-731-28510897
leka uila:[email protected]
Whatsapp/Wechat:+86 181 7339 2980
