• Carbide Edge Block Bakeng sa HPGR
Carbide Edge Block Bakeng sa HPGR
  • Ho tšoarella holimo
  • Mefuta e fapaneng
  • Khanyetso e babatsehang ea ho hanyetsa
  • Ts'ebetso e ntle maemong a thata a ts'ebetso

tlhaloso

Re na le feme e khethehileng ea tungsten carbide, hape re fana ka lihlahisoa tse ling tse ngata tseo re ke keng ra li hlahisa. e ikemiselitseng ho fumana lihlahisoa tse ntle ka ho fetisisa bakeng sa ba batlang ho fumana lihlahisoa tsa boleng bo botle le theko e ntle ka ho fetisisa.



Carbide Ball Head ButtonsCarbide Ball Head Buttons

Carbide HPGR Studs With Pin Head

Mochine oa khatiso oa rolara ke o mong oa lisebelisoa tse sebetsang hantle ka ho fetisisa tsa ho sila hona joale, sesebelisoa sa mantlha sa mochini oa khatiso ke tungsten carbide.

li-studs le li-block tsa hpgr. Ka thepa e tala ea boleng bo holimo le lisebelisoa tse tsoetseng pele, Zzbetter e fana ka moaparo o motle le ho ts'oha

ho hanyetsa ho kopana le maemo a fapaneng a thata a ho sebetsa.

Re na le boholo bo tloaelehileng, 'me re ka hlahisa ho latela setšoantšo sa hau kapa lisampole.


Engbaboleng ba carbide e entsoeng ka samentelikonopo?

❊ Kaofela rea ​​tseba hore taemane ke ntho e thata ka ho fetisisa, empa ho thata ho khotsofatsa tlhoko ea ho pshatla mafika merafong. Samente

carbide e sebetsa hantle ho latela boima le boima. Ka hona, boleng bo ekelitsoeng ba lisebelisoa tsa merafo tse hlahisoang ke

carbide e entsoeng ka samente e phahame.

konopo ea tungsten carbide ke thepa ea tšepe e thata haholo e thata haholo ho feta tšepe kapa tšepe, ea bobeli ho daemane.

Ntle le carbide e samente, ho thuha ha mafika merafong, ho ntšoa ha oli, le ho sebetsa ha mechini ea lithebe kaofela e tla ba mathata.

 

Lisebelisoa tsa tungsten carbide ke life?likonopo?

Konopo ea Carbide e na le tšebetso e ikhethang, e sebelisoa haholo ho cheka petroleum le ho tlosa lehloa, mohoma oa lehloa.

mechine le lisebelisoa tse ling.

Hape sebelisa bakeng sa ho cheka, merafo le mochini oa ho fiela litseleng, ho tlosa lehloa le lisebelisoa tsa ho lokisa litsela. Hape.

E na le thuso e kholo ho rapeng, ho rafa, lisebelisoa tsa ho khitla, hammoho le kaho ea sechaba.

1.Konopo ea Tungsten Carbide meno a carbide

Ho ea ka libopeho tse fapaneng, konopo ea carbide e ka aroloa ka li-buttons tse chitja, likonopo tsa conical, wedge.

likonopo, likonopo tsa khaba, likonopo tsa parabolic, joalo-joalo.

 

Li-Buttons tsa 2.Conical Bakeng sa Borewell Drill Bits And Mining

Konopo ea Round/Domed carbide hangata e sebelisoa bakeng sa konopo ea gauge ea DTH Bits, e loketseng bakeng sa abrasive haholo le haholo.

dibopeho tse thata.

 

3.likonopo tse entsoeng ka samente tsa carbide li sebelisoa haholo bakeng sa likonopo tsa gauge le likonopo tse ka pele tsa likotoana tsa DTH, tse loketseng

sebopeho se mahareng le se thata.

 

    Ithute haholoanyane ka lisebelisoa >> romella lipotso ho rona


 Carbide Ball Head ButtonsCarbide Ball Head Buttons

Carbide Ball Head Buttons

> romella lipotso ho rona:

romella lipotso ho rona

Kereiti e khothaletsoang

Kereiti
Boima ba 'mele (g/cm³)

Ho thatafala
HRA

TRS

UBT92

14.65

88.2

2560

(N/mm²)

UBT89

14.35

87

2850

E khothalelitsoeng Kopo

UBT85

14.2

85.5

2500

Bakeng sa ho sila majoe a thata kapa merafo a bonolo le a bohareng

Carbide Ball Head Buttons

Carbide Ball Head Buttons

undefined

Zhuzhou Better Tungsten Carbide Co., Ltd


ADDRESS:B/V 12-305, Da Han Hui Pu Industrial Park, Motse oa Zhuzhou, Chaena.
Mohala:+86 18173392980
Mohala:0086-731-28705418
Fax:0086-731-28510897
Email:[email protected]   
Whatsapp / Wechat:+86 181 7339 2980


RE THUSOE MOSE
Ka kopo, romella molaetsa 'me re tla khutlela ho uena!