- Kopo: ho etsa lisebelisoa tsa ho itšeha, joalo ka li-mill, li-burs tsa meno, reamer joalo-joalo
- Diameter: 1/16 inch ho 1 inch
- Bolelele: 330mm/310mm kapa customized
- lintho tse bonahalang: WC+Co
tlhaloso
Re na le feme e khethehileng ea tungsten carbide, hape re fana ka lihlahisoa tse ling tse ngata tseo re ke keng ra li hlahisa. e ikemiselitseng ho fumana lihlahisoa tse ntle ka ho fetisisa bakeng sa ba batlang ho fumana lihlahisoa tsa boleng bo botle le theko e ntle ka ho fetisisa.
Tungsten carbide rod ke eng?
Tungsten carbide rod, eo hape e bitsoang carbide round bar,molamu oa carbide o entsoeng ka samente,ke thepa e thata e phahameng, e matla le e thata haholo e nang le thepa e ka sehloohong e tala ea WC, e nang le litšepe tse ling le mekhahlelo ea ho peista e sebelisa mekhoa ea phofo ea metallurgical ka ho fokotsa khatello e tlaase.
Boleng ba lithupa tsa carbide tse entsoeng ka samente ke bofe?
Tungsten carbide molamuke thepa e ratoang bakeng sa tlhahiso ea lisebelisoa tsa tšepe, e sebelisoang haholo liindastering tse nang le litlhoko tse phahameng tsa ho hanyetsa ho apara, ho hanyetsa kutu le ho hanyetsa mocheso o phahameng. E na le ts'ebetso e ngata e ikhethang.
Lisebelisoa tsa tungsten carbide ke life?
Lithupa tsa Carbide li ka sebelisoa eseng feela bakeng sa lisebelisoa tsa ho seha le ho cheka (tse kang micron, twiste drill, cheka lisebelisoa tsa merafo tse otlolohileng), empa hape le bakeng sa lisebelisoa tsa ho kenya, likarolo tse fapaneng tsa moqolo le lisebelisoa tsa mohaho. Ho feta moo, e ka sebelisoa likarolong tse ngata, tse kang mechine, lik'hemik'hale, petroleum, metallurgy, elektroniki le indasteri ea ts'ireletso.
Lithupa tsa 1.Carbide bakeng sa ho etsa lisebelisoa tsa ho itšeha
Lithupa tsa 2.Carbide bakeng sa ho etsa litebele
3.Carbide rods bakeng sa ho etsa mandrels
Lithupa tsa 4.Carbide bakeng sa ho etsa lisebelisoa tsa lisebelisoa
5.Carbide rods bakeng sa ho etsa plunger
Lithupa tsa 6.Carbide bakeng sa ho etsa lisebelisoa tsa ho phunya
1. Tlhaloso ea Mofuta:ØD×L
2. Kopo: bakeng sa ho etsa lisebelisoa tsa ho itšeha, mohlala li-mills tsa ho qetela, li-burs tsa meno, reamer joalo-joalo.
3. Diameter:1/16 inch ho isa ho 1 inch
4. Bolelele: standard 330mm/310mm kapa customized
5. Bokaholimo: fatše
6. Boitsebiso: WC + CO
| Lebitso la Sehlahiswa | Lithupa tsa Carbide h6 fatše ka inch |
| Lintho tse bonahalang | WC+CO |
| Kereiti | K05-K40 |
| Boholo ba lijo-thollo | E ntle, e mahareng |
| Ho thatafala | 87.6-94HRA |
| T.R.S | 3000-4200 |
| Bokaholimo | Gchitja |
| Kopo | E sebedisetsoa ho etsa lisebelisoa tsa ho seha joalo ka li-endmill, drill, reamers le dental burrs |
Kereiti ya thepa
Kereiti | Khoutu ea ISO | Boholo ba lijo-thollo | Cobalt | Boima ba 'mele (g/cm3) | Ho thatafala (HRA) | T.R.S(Mpa) |
UBT05 | K05-K10 | 1.0 | 6.0 | 14.95 | 92 | 3000 |
UBT10 | K05-K10 | 0.4 | 6.0 | 14.8 | 94 | 3800 |
UBT20F | K20-K40 | 0.8 | 10.2 | 14.5 | 91.5 | 3900 |
UBT20 | K20-K40 | 0.6 | 10.2 | 14.3 | 92.3 | 3800 |
UBT25 | K20-K40 | 0.4 | 12 | 14.1 | 92.5 | 4200 |
UBT30 | K30-K40 | 1.5 | 15 | 14 | 87.6 | 4000 |
Lisebelisoa tsa kereiti
Kereiti | Sesebelisoa se khothalelitsoeng |
UBT05 | Drill, endmill le burr lia khothaletsoa. E loketse haholo ho seha tšepe le graphite e seng ferrous (ho hlokahala ho roala) |
UBT10 | Boholo ba lijo-thollo, bo sa senyeheng hantle. Li-endmill le lisebelisoa tsa mongolo lia khothaletsoa. E loketse ho seha PCB le polasetiki |
UBT20F | Li-drill le li-endmill lia khothaletsoa. E loketse ho seha kakaretso ea tšepe (HRC |
UBT20 | Li-Drill le endmill lia khothaletsoa. E loketse ho seha tšepe e sa hloekang, alloy e thibelang mocheso le tšepe e entsoeng ka tšepe |
UBT25 | Ho khothaletsoa boholo ba lijo-thollo, cobalt e ngata e thata le ho tiea, li-endmill le reamer, haholo-holo li loketse bakeng sa tšepe e sehang (HRC: 45-55), motsoako oa aluminium le motsoako oa titanium |
UBT30 | E loketse bakeng sa ho phunya hlobo, lithulusi le li-anti-vibration boring bar jj |
Litekanyo tse sebelisoang hangata li ka tlase
D(inch) | Mamello(mm) | Diameter e nang le mamello ea h6 | L(mm) | Tol.of L(mm) |
1/16 | 0~+0.2 | 1.5875 | 330 | 0~+1.5 |
1/8 | 0~+0.2 | 3.1750 | 330 | 0~+1.5 |
3/16 | 0~+0.2 | 4.7825 | 330 | 0~+1.5 |
1/4 | 0~+0.3 | 6.3500 | 330 | 0~+1.5 |
5/16 | 0~+0.3 | 7.9375 | 330 | 0~+1.5 |
3/8 | 0~+0.3 | 9.5250 | 330 | 0~+1.5 |
7/16 | 0~+0.3 | 11.1125 | 330 | 0~+1.5 |
1/2 | 0~+0.3 | 12.7000 | 330 | 0~+1.5 |
9/16 | 0~+0.3 | 14.2875 | 330 | 0~+1.5 |
5/8 | 0~+0.4 | 15.875 | 330 | 0~+1.5 |
11/16 | 0~+0.4 | 17.4625 | 330 | 0~+1.5 |
3/4 | 0~+0.4 | 19.0500 | 330 | 0~+1.5 |
13/16 | 0~+0.5 | 20.6375 | 330 | 0~+1.5 |
7/8 | 0~+0.5 | 22.2250 | 330 | 0~+1.5 |
15/16 | 0~+0.5 | 23.8125 | 330 | 0~+1.5 |
1 | 0~+0.5 | 25.4000 | 330 | 0~+1.5 |
E hlokometse: re ka hlahisa lithupa tsa tungsten carbide ho latela kopo ea moreki
Zhuzhou Better Tungsten Carbide Co., Ltd
ADDRESS:B/V 12-305, Da Han Hui Pu Industrial Park, Motse oa Zhuzhou, Chaena.
Mohala:+86 18173392980
Mohala:0086-731-28705418
Fax:0086-731-28510897
Email:[email protected]
Whatsapp / Wechat:+86 181 7339 2980
