- Boholo bo felletseng
- Khanyetso e phahameng
- Ho bonolo ho cheselletsa
- Eketsa katleho ea ho cheka
tlhaloso
Re na le feme e khethehileng ea tungsten carbide, hape re fana ka lihlahisoa tse ling tse ngata tseo re ke keng ra li hlahisa. e ikemiselitseng ho fumana lihlahisoa tse ntle ka ho fetisisa bakeng sa ba batlang ho fumana lihlahisoa tsa boleng bo botle le theko e ntle ka ho fetisisa.
Tungsten Carbide Chisel Bits
Re ka hlahisa malebela a Tungsten carbide bakeng sa likotoana tse le 'ngoe tse otlolohileng tsa chisel le likotoana tsa cross chisel.
Li sebelisetsoa ho etsa likotoana tsa ho cheka carbide tse entsoeng ka chisel, likotoana tsa ho cheka carbide le likotoana tsa X-shaped carbide drill.
Engbaboleng ba carbide e entsoeng ka samentelikonopo?
❊ Kaofela rea tseba hore taemane ke ntho e thata ka ho fetisisa, empa ho thata ho khotsofatsa tlhoko ea ho pshatla mafika merafong. Samente
carbide e sebetsa hantle ho latela boima le boima. Ka hona, boleng bo ekelitsoeng ba lisebelisoa tsa merafo tse hlahisoang ke
carbide e entsoeng ka samente e phahame.
❊konopo ea tungsten carbide ke thepa ea tšepe e thata haholo e thata haholo ho feta tšepe kapa tšepe, ea bobeli ho daemane.
❊Ntle le carbide e samente, ho thuha ha mafika merafong, ho ntšoa ha oli, le ho sebetsa ha mechini ea lithebe kaofela e tla ba mathata.
Lisebelisoa tsa tungsten carbide ke life?likonopo?
Konopo ea Carbide e na le tšebetso e ikhethang, e sebelisoa haholo ho cheka petroleum le ho tlosa lehloa, mohoma oa lehloa.
mechine le lisebelisoa tse ling.
Hape sebelisa bakeng sa ho cheka, merafo le mochini oa ho fiela litseleng, ho tlosa lehloa le lisebelisoa tsa ho lokisa litsela. Hape.
E na le thuso e kholo ho rapeng, ho rafa, lisebelisoa tsa ho khitla, hammoho le kaho ea sechaba.
1.Konopo ea Tungsten Carbide meno a carbide：
Ho ea ka libopeho tse fapaneng, konopo ea carbide e ka aroloa ka li-buttons tse chitja, likonopo tsa conical, wedge.
likonopo, likonopo tsa khaba, likonopo tsa parabolic, joalo-joalo.
Li-Buttons tsa 2.Conical Bakeng sa Borewell Drill Bits And Mining
Konopo ea Round/Domed carbide hangata e sebelisoa bakeng sa konopo ea gauge ea DTH Bits, e loketseng bakeng sa abrasive haholo le haholo.
dibopeho tse thata.
3.likonopo tse entsoeng ka samente tsa carbide li sebelisoa haholo bakeng sa likonopo tsa gauge le likonopo tse ka pele tsa likotoana tsa DTH, tse loketseng
sebopeho se mahareng le se thata.
Ithute haholoanyane ka lisebelisoa >> romella lipotso ho rona
> romella lipotso ho rona | romella lipotso ho rona | |||||
L | H | S | R | r | r1 | |
Mofuta | Boholo (mm) | Fetela. | ||||
K1013 | 13 | 10 | 4 | 40 | 8 | 0.5-1.0 |
K1016 | 16 | 12 | 6 | 30 | 8 | |
K1020 | 20 | 12 | 6 | 40 | 10 | |
K1026 | 26 | 12 | 6 | 50 | 13 | |
K030 | 30 | 15 | 8 | 80 | 15 | |
K1032 | 32 | 15 | 8 | 80 | 16 | |
K1034 | 34 | 15 | 8 | 80 | 17 | |
K1036 | 36 | 15 | 8 | 80 | 18 | |
K1038 | 38 | 15 | 8 | 120 | 19 | |
K1040 | 40 | 15 | 8 | 120 | 20 | |
K1043 | 43 | 15 | 10 | 120 | 21.5 | |
K1046 | 46 | 15 | 10 | 160 | 23 | |
K1049 | 49 | 18 | 10 | 160 | 24.5 | |
K1054 | 54 | 18 | 10 | 160 | 27 | |
Fetela
Fetela
Mefuta e meng e kang K0 K1 K20 le K21 e fumaneha ho rona. | Kereiti:） | Co% | Botenya (g/cm³ | Ho thatafala (HRA) |
9 | 14.61 | 87.7 | 2800 | 2.4 |
10 | 14.52 | 87.2 | 2900 | 3.2 |
11.5 | 11.36 | 87.2 | 3000 | 2.4 |
Zhuzhou Better Tungsten Carbide Co., Ltd
ADDRESS:B/V 12-305, Da Han Hui Pu Industrial Park, Motse oa Zhuzhou, Chaena.
Mohala:+86 18173392980
Mohala:0086-731-28705418
Fax:0086-731-28510897
Email:[email protected]
Whatsapp / Wechat:+86 181 7339 2980
